Class: Rectangle

Phaser. Rectangle

new Rectangle(x, y, width, height)

Creates a new Rectangle object with the top-left corner specified by the x and y parameters and with the specified width and height parameters. If you call this function without parameters, a Rectangle with x, y, width, and height properties set to 0 is created.

Parameters:
Name Type Description
x number

The x coordinate of the top-left corner of the Rectangle.

y number

The y coordinate of the top-left corner of the Rectangle.

width number

The width of the Rectangle. Should always be either zero or a positive value.

height number

The height of the Rectangle. Should always be either zero or a positive value.

Source:
src/geom/Rectangle.js line 18

Members

bottom : number

The sum of the y and height properties. Changing the bottom property of a Rectangle object has no effect on the x, y and width properties, but does change the height property.

Type:
  • number
Source:
src/geom/Rectangle.js line 527

bottomLeft : Phaser.Point

The location of the Rectangles bottom left corner as a Point object. Gets or sets the location of the Rectangles bottom left corner as a Point object.

Type:
Source:
src/geom/Rectangle.js line 553

bottomRight : Phaser.Point

The location of the Rectangles bottom right corner as a Point object. Gets or sets the location of the Rectangles bottom right corner as a Point object.

Type:
Source:
src/geom/Rectangle.js line 571

centerX : number

The x coordinate of the center of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 660

centerY : number

The y coordinate of the center of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 677

empty : boolean

Determines whether or not this Rectangle object is empty. A Rectangle object is empty if its width or height is less than or equal to 0. If set to true then all of the Rectangle properties are set to 0. Gets or sets the Rectangles empty state.

Type:
  • boolean
Source:
src/geom/Rectangle.js line 785

<readonly> halfHeight : number

Half of the height of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 514

<readonly> halfWidth : number

Half of the width of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 501

height : number

The height of the Rectangle. This value should never be set to a negative.

Type:
  • number
Source:
src/geom/Rectangle.js line 43

left : number

The x coordinate of the left of the Rectangle. Changing the left property of a Rectangle object has no effect on the y and height properties. However it does affect the width property, whereas changing the x value does not affect the width property.

Type:
  • number
Source:
src/geom/Rectangle.js line 589

<readonly> perimeter : number

The perimeter size of the Rectangle. This is the sum of all 4 sides.

Type:
  • number
Source:
src/geom/Rectangle.js line 646

randomX : number

A random value between the left and right values (inclusive) of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 694

randomY : number

A random value between the top and bottom values (inclusive) of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 710

The sum of the x and width properties. Changing the right property of a Rectangle object has no effect on the x, y and height properties, however it does affect the width property.

Type:
  • number
Source:
src/geom/Rectangle.js line 611

top : number

The y coordinate of the top of the Rectangle. Changing the top property of a Rectangle object has no effect on the x and width properties. However it does affect the height property, whereas changing the y value does not affect the height property.

Type:
  • number
Source:
src/geom/Rectangle.js line 726

topLeft : Phaser.Point

The location of the Rectangles top left corner as a Point object.

Type:
Source:
src/geom/Rectangle.js line 749

topRight : Phaser.Point

The location of the Rectangles top right corner as a Point object. The location of the Rectangles top left corner as a Point object.

Type:
Source:
src/geom/Rectangle.js line 767

<readonly> type : number

The const type of this object.

Type:
  • number
Source:
src/geom/Rectangle.js line 49

<readonly> volume : number

The volume of the Rectangle derived from width * height.

Type:
  • number
Source:
src/geom/Rectangle.js line 632

width : number

The width of the Rectangle. This value should never be set to a negative.

Type:
  • number
Source:
src/geom/Rectangle.js line 38

x : number

The x coordinate of the top-left corner of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 28

y : number

The y coordinate of the top-left corner of the Rectangle.

Type:
  • number
Source:
src/geom/Rectangle.js line 33

Methods

<static> clone(a [, output])

Returns a new Rectangle object with the same values for the x, y, width, and height properties as the original Rectangle object.

Parameters:
Name Type Argument Description
a Phaser.Rectangle

The Rectangle object.

output Phaser.Rectangle <optional>

Optional Rectangle object. If given the values will be set into the object, otherwise a brand new Rectangle object will be created and returned.

Source:
src/geom/Rectangle.js line 864
Returns:
Type
Phaser.Rectangle

<static> contains(a, x, y)

Determines whether the specified coordinates are contained within the region defined by this Rectangle object.

Parameters:
Name Type Description
a Phaser.Rectangle

The Rectangle object.

x number

The x coordinate of the point to test.

y number

The y coordinate of the point to test.

Source:
src/geom/Rectangle.js line 904
Returns:

A value of true if the Rectangle object contains the specified point; otherwise false.

Type
boolean

<static> containsPoint(a, point)

Determines whether the specified point is contained within the rectangular region defined by this Rectangle object. This method is similar to the Rectangle.contains() method, except that it takes a Point object as a parameter.

Parameters:
Name Type Description
a Phaser.Rectangle

The Rectangle object.

point Phaser.Point

The point object being checked. Can be Point or any object with .x and .y values.

Source:
src/geom/Rectangle.js line 940
Returns:

A value of true if the Rectangle object contains the specified point; otherwise false.

Type
boolean

<static> containsRaw(rx, ry, rw, rh, x, y)

Determines whether the specified coordinates are contained within the region defined by the given raw values.

Parameters:
Name Type Description
rx number

The x coordinate of the top left of the area.

ry number

The y coordinate of the top left of the area.

rw number

The width of the area.

rh number

The height of the area.

x number

The x coordinate of the point to test.

y number

The y coordinate of the point to test.

Source:
src/geom/Rectangle.js line 923
Returns:

A value of true if the Rectangle object contains the specified point; otherwise false.

Type
boolean

<static> containsRect(a, b)

Determines whether the first Rectangle object is fully contained within the second Rectangle object. A Rectangle object is said to contain another if the second Rectangle object falls entirely within the boundaries of the first.

Parameters:
Name Type Description
a Phaser.Rectangle

The first Rectangle object.

b Phaser.Rectangle

The second Rectangle object.

Source:
src/geom/Rectangle.js line 953
Returns:

A value of true if the Rectangle object contains the specified point; otherwise false.

Type
boolean

<static> createFromBounds(a [, output])

Returns a new Rectangle object with the same values for the left, top, width, and height properties as the original object.

Parameters:
Name Type Argument Description
a any

An object with left, top, width, and height properties.

output Phaser.Rectangle <optional>

Optional Rectangle object. If given the values will be set into the object, otherwise a brand new Rectangle object will be created and returned.

Source:
src/geom/Rectangle.js line 886
Returns:
Type
Phaser.Rectangle

<static> equals(a, b)

Determines whether the two Rectangles are equal. This method compares the x, y, width and height properties of each Rectangle.

Parameters:
Name Type Description
a Phaser.Rectangle

The first Rectangle object.

b Phaser.Rectangle

The second Rectangle object.

Source:
src/geom/Rectangle.js line 973
Returns:

A value of true if the two Rectangles have exactly the same values for the x, y, width and height properties; otherwise false.

Type
boolean

<static> inflate(a, dx, dy)

Increases the size of the Rectangle object by the specified amounts. The center point of the Rectangle object stays the same, and its size increases to the left and right by the dx value, and to the top and the bottom by the dy value.

Parameters:
Name Type Description
a Phaser.Rectangle

The Rectangle object.

dx number

The amount to be added to the left side of the Rectangle.

dy number

The amount to be added to the bottom side of the Rectangle.

Source:
src/geom/Rectangle.js line 810
Returns:

This Rectangle object.

Type
Phaser.Rectangle

<static> inflatePoint(a, point)

Increases the size of the Rectangle object. This method is similar to the Rectangle.inflate() method except it takes a Point object as a parameter.

Parameters:
Name Type Description
a Phaser.Rectangle

The Rectangle object.

point Phaser.Point

The x property of this Point object is used to increase the horizontal dimension of the Rectangle object. The y property is used to increase the vertical dimension of the Rectangle object.

Source:
src/geom/Rectangle.js line 829
Returns:

The Rectangle object.

Type
Phaser.Rectangle

<static> intersection(a, b [, output])

If the Rectangle object specified in the toIntersect parameter intersects with this Rectangle object, returns the area of intersection as a Rectangle object. If the Rectangles do not intersect, this method returns an empty Rectangle object with its properties set to 0.

Parameters:
Name Type Argument Description
a Phaser.Rectangle

The first Rectangle object.

b Phaser.Rectangle

The second Rectangle object.

output Phaser.Rectangle <optional>

Optional Rectangle object. If given the intersection values will be set into this object, otherwise a brand new Rectangle object will be created and returned.

Source:
src/geom/Rectangle.js line 1000
Returns:

A Rectangle object that equals the area of intersection. If the Rectangles do not intersect, this method returns an empty Rectangle object; that is, a Rectangle with its x, y, width, and height properties set to 0.

Type
Phaser.Rectangle

<static> intersects(a, b)

Determines whether the two Rectangles intersect with each other. This method checks the x, y, width, and height properties of the Rectangles.

Parameters:
Name Type Description
a Phaser.Rectangle

The first Rectangle object.

b Phaser.Rectangle

The second Rectangle object.

Source:
src/geom/Rectangle.js line 1027
Returns:

A value of true if the specified object intersects with this Rectangle object; otherwise false.

Type
boolean

<static> intersectsRaw(left, right, top, bottom, tolerance)

Determines whether the object specified intersects (overlaps) with the given values.

Parameters:
Name Type Description
left number

The x coordinate of the left of the area.

right number

The right coordinate of the area.

top number

The y coordinate of the area.

bottom number

The bottom coordinate of the area.

tolerance number

A tolerance value to allow for an intersection test with padding, default to 0

Source:
src/geom/Rectangle.js line 1046
Returns:

A value of true if the specified object intersects with the Rectangle; otherwise false.

Type
boolean

<static> sameDimensions(a, b)

Determines if the two objects (either Rectangles or Rectangle-like) have the same width and height values under strict equality.

Parameters:
Name Type Description
a Rectangle-like

The first Rectangle object.

b Rectangle-like

The second Rectangle object.

Source:
src/geom/Rectangle.js line 987
Returns:

True if the object have equivalent values for the width and height properties.

Type
boolean

<static> size(a [, output])

The size of the Rectangle object, expressed as a Point object with the values of the width and height properties.

Parameters:
Name Type Argument Description
a Phaser.Rectangle

The Rectangle object.

output Phaser.Point <optional>

Optional Point object. If given the values will be set into the object, otherwise a brand new Point object will be created and returned.

Source:
src/geom/Rectangle.js line 842
Returns:

The size of the Rectangle object

Type
Phaser.Point

<static> union(a, b [, output])

Adds two Rectangles together to create a new Rectangle object, by filling in the horizontal and vertical space between the two Rectangles.

Parameters:
Name Type Argument Description
a Phaser.Rectangle

The first Rectangle object.

b Phaser.Rectangle

The second Rectangle object.

output Phaser.Rectangle <optional>

Optional Rectangle object. If given the new values will be set into this object, otherwise a brand new Rectangle object will be created and returned.

Source:
src/geom/Rectangle.js line 1064
Returns:

A Rectangle object that is the union of the two Rectangles.

Type
Phaser.Rectangle

aabb(points [, out])

Calculates the Axis Aligned Bounding Box (or aabb) from an array of points.

Parameters:
Name Type Argument Description
points Array.<Phaser.Point>

The array of one or more points.

out Phaser.Rectangle <optional>

Optional Rectangle to store the value in, if not supplied a new Rectangle object will be created.

Source:
src/geom/Rectangle.js line 1083
Returns:

The new Rectangle object.

Type
Phaser.Rectangle

ceil()

Runs Math.ceil() on both the x and y values of this Rectangle.

Source:
src/geom/Rectangle.js line 163

ceilAll()

Runs Math.ceil() on the x, y, width and height values of this Rectangle.

Source:
src/geom/Rectangle.js line 174

centerOn(x, y)

Centers this Rectangle so that the center coordinates match the given x and y values.

Parameters:
Name Type Description
x number

The x coordinate to place the center of the Rectangle at.

y number

The y coordinate to place the center of the Rectangle at.

Source:
src/geom/Rectangle.js line 122
Returns:

This Rectangle object

Type
Phaser.Rectangle

clone( [output])

Returns a new Rectangle object with the same values for the x, y, width, and height properties as the original Rectangle object.

Parameters:
Name Type Argument Description
output Phaser.Rectangle <optional>

Optional Rectangle object. If given the values will be set into the object, otherwise a brand new Rectangle object will be created and returned.

Source:
src/geom/Rectangle.js line 271
Returns:
Type
Phaser.Rectangle

contains(x, y)

Determines whether the specified coordinates are contained within the region defined by this Rectangle object.

Parameters:
Name Type Description
x number

The x coordinate of the point to test.

y number

The y coordinate of the point to test.

Source:
src/geom/Rectangle.js line 283
Returns:

A value of true if the Rectangle object contains the specified point; otherwise false.

Type
boolean

containsRect(b)

Determines whether the first Rectangle object is fully contained within the second Rectangle object. A Rectangle object is said to contain another if the second Rectangle object falls entirely within the boundaries of the first.

Parameters:
Name Type Description
b Phaser.Rectangle

The second Rectangle object.

Source:
src/geom/Rectangle.js line 296
Returns:

A value of true if the Rectangle object contains the specified point; otherwise false.

Type
boolean

copyFrom(source)

Copies the x, y, width and height properties from any given object to this Rectangle.

Parameters:
Name Type Description
source any

The object to copy from.

Source:
src/geom/Rectangle.js line 187
Returns:

This Rectangle object.

Type
Phaser.Rectangle

copyFromBounds(source)

Copies the left, top, width and height properties from any given object to this Rectangle.

Parameters:
Name Type Description
source any

The object to copy from.

Source:
src/geom/Rectangle.js line 199
Returns:

This Rectangle object.

Type
Phaser.Rectangle

copyTo(source)

Copies the x, y, width and height properties from this Rectangle to any given object.

Parameters:
Name Type Description
source any

The object to copy to.

Source:
src/geom/Rectangle.js line 211
Returns:

This object.

Type
object

equals(b)

Determines whether the two Rectangles are equal. This method compares the x, y, width and height properties of each Rectangle.

Parameters:
Name Type Description
b Phaser.Rectangle

The second Rectangle object.

Source:
src/geom/Rectangle.js line 309
Returns:

A value of true if the two Rectangles have exactly the same values for the x, y, width and height properties; otherwise false.

Type
boolean

floor()

Runs Math.floor() on both the x and y values of this Rectangle.

Source:
src/geom/Rectangle.js line 139

floorAll()

Runs Math.floor() on the x, y, width and height values of this Rectangle.

Source:
src/geom/Rectangle.js line 150

getPoint( [position] [, out])

Returns a point based on the given position constant, which can be one of:

Phaser.TOP_LEFT, Phaser.TOP_CENTER, Phaser.TOP_RIGHT, Phaser.LEFT_CENTER, Phaser.CENTER, Phaser.RIGHT_CENTER, Phaser.BOTTOM_LEFT, Phaser.BOTTOM_CENTER and Phaser.BOTTOM_RIGHT.

This method returns the same values as calling Rectangle.bottomLeft, etc, but those calls always create a new Point object, where-as this one allows you to use your own.

Parameters:
Name Type Argument Description
position integer <optional>

One of the Phaser position constants, such as Phaser.TOP_RIGHT.

out Phaser.Point <optional>

A Phaser.Point that the values will be set in. If no object is provided a new Phaser.Point object will be created. In high performance areas avoid this by re-using an existing object.

Source:
src/geom/Rectangle.js line 398
Returns:

An object containing the point in its x and y properties.

Type
Phaser.Point

inflate(dx, dy)

Increases the size of the Rectangle object by the specified amounts. The center point of the Rectangle object stays the same, and its size increases to the left and right by the dx value, and to the top and the bottom by the dy value.

Parameters:
Name Type Description
dx number

The amount to be added to the left side of the Rectangle.

dy number

The amount to be added to the bottom side of the Rectangle.

Source:
src/geom/Rectangle.js line 228
Returns:

This Rectangle object.

Type
Phaser.Rectangle

intersection(b, out)

If the Rectangle object specified in the toIntersect parameter intersects with this Rectangle object, returns the area of intersection as a Rectangle object. If the Rectangles do not intersect, this method returns an empty Rectangle object with its properties set to 0.

Parameters:
Name Type Description
b Phaser.Rectangle

The second Rectangle object.

out Phaser.Rectangle

Optional Rectangle object. If given the intersection values will be set into this object, otherwise a brand new Rectangle object will be created and returned.

Source:
src/geom/Rectangle.js line 322
Returns:

A Rectangle object that equals the area of intersection. If the Rectangles do not intersect, this method returns an empty Rectangle object; that is, a Rectangle with its x, y, width, and height properties set to 0.

Type
Phaser.Rectangle

intersects(b)

Determines whether this Rectangle and another given Rectangle intersect with each other. This method checks the x, y, width, and height properties of the two Rectangles.

Parameters:
Name Type Description
b Phaser.Rectangle

The second Rectangle object.

Source:
src/geom/Rectangle.js line 335
Returns:

A value of true if the specified object intersects with this Rectangle object; otherwise false.

Type
boolean

intersectsRaw(left, right, top, bottom, tolerance)

Determines whether the coordinates given intersects (overlaps) with this Rectangle.

Parameters:
Name Type Description
left number

The x coordinate of the left of the area.

right number

The right coordinate of the area.

top number

The y coordinate of the area.

bottom number

The bottom coordinate of the area.

tolerance number

A tolerance value to allow for an intersection test with padding, default to 0

Source:
src/geom/Rectangle.js line 349
Returns:

A value of true if the specified object intersects with the Rectangle; otherwise false.

Type
boolean

offset(dx, dy)

Adjusts the location of the Rectangle object, as determined by its top-left corner, by the specified amounts.

Parameters:
Name Type Description
dx number

Moves the x value of the Rectangle object by this amount.

dy number

Moves the y value of the Rectangle object by this amount.

Source:
src/geom/Rectangle.js line 55
Returns:

This Rectangle object.

Type
Phaser.Rectangle

offsetPoint(point)

Adjusts the location of the Rectangle object using a Point object as a parameter. This method is similar to the Rectangle.offset() method, except that it takes a Point object as a parameter.

Parameters:
Name Type Description
point Phaser.Point

A Point object to use to offset this Rectangle object.

Source:
src/geom/Rectangle.js line 71
Returns:

This Rectangle object.

Type
Phaser.Rectangle

random( [out])

Returns a uniformly distributed random point from anywhere within this Rectangle.

Parameters:
Name Type Argument Description
out Phaser.Point | object <optional>

A Phaser.Point, or any object with public x/y properties, that the values will be set in. If no object is provided a new Phaser.Point object will be created. In high performance areas avoid this by re-using an existing object.

Source:
src/geom/Rectangle.js line 379
Returns:

An object containing the random point in its x and y properties.

Type
Phaser.Point

resize(width, height)

Resize the Rectangle by providing a new width and height. The x and y positions remain unchanged.

Parameters:
Name Type Description
width number

The width of the Rectangle. Should always be either zero or a positive value.

height number

The height of the Rectangle. Should always be either zero or a positive value.

Source:
src/geom/Rectangle.js line 253
Returns:

This Rectangle object

Type
Phaser.Rectangle

scale(x [, y])

Scales the width and height of this Rectangle by the given amounts.

Parameters:
Name Type Argument Description
x number

The amount to scale the width of the Rectangle by. A value of 0.5 would reduce by half, a value of 2 would double the width, etc.

y number <optional>

The amount to scale the height of the Rectangle by. A value of 0.5 would reduce by half, a value of 2 would double the height, etc.

Source:
src/geom/Rectangle.js line 103
Returns:

This Rectangle object

Type
Phaser.Rectangle

setTo(x, y, width, height)

Sets the members of Rectangle to the specified values.

Parameters:
Name Type Description
x number

The x coordinate of the top-left corner of the Rectangle.

y number

The y coordinate of the top-left corner of the Rectangle.

width number

The width of the Rectangle. Should always be either zero or a positive value.

height number

The height of the Rectangle. Should always be either zero or a positive value.

Source:
src/geom/Rectangle.js line 83
Returns:

This Rectangle object

Type
Phaser.Rectangle

sides( [top] [, right] [, bottom] [, left])

Creates or positions four Phaser.Line lines representing the Rectangle's sides.

Parameters:
Name Type Argument Description
top Phaser.Line <optional>
right Phaser.Line <optional>
bottom Phaser.Line <optional>
left Phaser.Line <optional>
Source:
src/geom/Rectangle.js line 451
Returns:
  • An array containing four lines (if no arguments were given), or null.
Type
Array.<Phaser.Line>

size( [output])

The size of the Rectangle object, expressed as a Point object with the values of the width and height properties.

Parameters:
Name Type Argument Description
output Phaser.Point <optional>

Optional Point object. If given the values will be set into the object, otherwise a brand new Point object will be created and returned.

Source:
src/geom/Rectangle.js line 241
Returns:

The size of the Rectangle object.

Type
Phaser.Point

toString()

Returns a string representation of this object.

Source:
src/geom/Rectangle.js line 488
Returns:

A string representation of the instance.

Type
string

union(b [, out])

Adds two Rectangles together to create a new Rectangle object, by filling in the horizontal and vertical space between the two Rectangles.

Parameters:
Name Type Argument Description
b Phaser.Rectangle

The second Rectangle object.

out Phaser.Rectangle <optional>

Optional Rectangle object. If given the new values will be set into this object, otherwise a brand new Rectangle object will be created and returned.

Source:
src/geom/Rectangle.js line 366
Returns:

A Rectangle object that is the union of the two Rectangles.

Type
Phaser.Rectangle

phaser-ce@2.9.2 is on GitHub and NPM

Documentation generated by JSDoc 3.5.4 on 2017-11-09 using Tomorrow.